Tigo Cloud Connect Advanced (CCA) Kit 348-00000-52 (TAP, DIN Rail Power Supply & Outdoor Enclosure)

The Tigo Cloud Connect Advanced (CCA) Kit 348-00000-52 is a complete Tigo CCA kit for outdoor solar monitoring and rapid shutdown control, bundling the CCA data logger, Tigo Access Point (TAP), DIN rail power supply, and an IP68-rated outdoor enclosure in one pre-matched package. Together, these components form the communication and safety hub of a Tigo Flex MLPE solar monitoring system, enabling module-level performance visibility through the Tigo Energy Intelligence platform. Designed specifically for exposed installations where both weatherproof housing and clean DIN rail wiring are required, this kit lets installers deploy a commission-ready monitoring node without sourcing and verifying compatible hardware separately.

What's included

• Cloud Connect Advanced (CCA) — compact data logger, 1.22 × 4.55 × 2.82 in. (31 × 115.51 × 71.54 mm), 0.28 lbs. (126 g); input 10–25 VDC, 3–7 W
• Tigo Access Point (TAP) — wireless mesh access point, 4.97 × 5.12 × 1.06 in. (126.2 × 130.0 × 26.8 mm), 0.5 lbs. (227 g); mounts on module frame without tools
• DIN Rail Power Supply — 100–240 VAC input; mounts inside the enclosure and powers the CCA directly
• IP68-rated Outdoor Enclosure — Type 4R weatherproof housing, 4.53 × 10.96 × 7.99 in. (115 × 278.4 × 203 mm); combined kit weight 2.43 lbs. (1.1 kg) with power supply installed
• Not included: Tigo TS4 optimizers or switches (sold separately), conduit and weatherproof fittings for cable entry, mounting hardware, cellular module (optional upgrade)

System specifications

• Monitoring capacity: up to 900 TS4 units per CCA (supports up to 7 TAPs); each TAP covers up to 300 TS4 units within 115 ft (35 m)
• Connectivity: Ethernet and Wi-Fi built-in; optional cellular connectivity (module sold separately)
• Third-party integration: Modbus RS485 — compatible with inverters, charge controllers, batteries, weather stations, and revenue-grade meters from all major manufacturers
• Environmental rating: IP68, Type 4R outdoor enclosure; CCA operating range -4°F to 158°F (-20°C to 70°C); TAP rated -4°F to 185°F (-20°C to 85°C)
• Certifications: CE, FCC, UL (CSA), RoHS; NEC 2014/2017 Section 690.12 rapid shutdown compliant

Eliminate component-matching guesswork

Sourcing a CCA, access point, DIN rail power supply, and outdoor enclosure separately means verifying compatibility across four line items before a single wire is run — and any mismatch surfaces only at the job site. This kit pre-engineers that decision: all four components arrive confirmed compatible, pre-selected for outdoor DIN rail deployment, and ready to commission using the Tigo SMART app for Android or iOS. Installers get immediate access to module-level performance data from the first power-on, cutting commissioning time on every installation.

Who this kit is built for

• Residential rooftop systems with Tigo optimizers — provides module-level solar monitoring for homes using TS4-A-O, TS4-A-S, or TS4-A-M units, with capacity to scale by adding TAPs as the array grows.
• Commercial and light industrial arrays — the CCA's 900-unit capacity and Modbus integration allow a single logger to span large multi-string systems with full inverter and revenue-grade meter visibility.
• Exposed or outdoor electrical installations — when the monitoring node cannot be housed indoors, the IP68, Type 4R enclosure is the correct specification for direct weather exposure in any climate.
• NEC 690.12 rapid shutdown compliance — the CCA controls module-level deactivation for Tigo TS4 systems to meet 2014 and 2017 code requirements on residential and commercial rooftops.
• Retrofit monitoring upgrades — connects to existing Modbus-equipped string inverters, batteries, and meters to add module-level insight where Tigo TS4 units are already installed.

How the components connect

The DIN rail power supply accepts 100–240 VAC and steps down to the 10–25 VDC the CCA requires, with both units mounting inside the outdoor enclosure on a standard DIN rail. The CCA connects to the TAP through its RS485 GATEWAY port; the TAP then communicates wirelessly with Tigo TS4 optimizers and switches using a mesh radio network, covering up to 300 units within a 115 ft (35 m) radius per TAP. Up to 7 TAPs can be connected to a single CCA via its RS485 ports to expand monitoring coverage to 900 TS4 units across larger arrays. Third-party Modbus devices — inverters, batteries, meters, and weather stations — wire directly to the CCA's RS485-1 or RS485-2 ports. Buyers will also need conduit and weatherproof fittings for cable entry into the enclosure, Tigo TS4 units, and an active Tigo Energy Intelligence account to access real-time and historical cloud monitoring data.

Why choose the Tigo Cloud Connect Advanced (CCA) Kit 348-00000-52?

The 348-00000-52 is the only variant in Tigo's CCA lineup that pairs a DIN rail power supply with an IP68/Type 4R outdoor enclosure and TAP in a single order — the right configuration when weatherproof housing and rail-mounted wiring both belong in the same box. Where other CCA kits use an outlet power supply or omit the enclosure entirely, this kit removes field improvisation from power delivery and housing selection. Tigo's open platform supports string inverters, batteries, and metering equipment from all major manufacturers worldwide, so the CCA functions as a universal data hub regardless of the broader system architecture.