Discover AES batteries 6.65Wh Lithium iron Battery 42-48-6650

The Discover AES batteries are an excellent choice for applications needing deep cycling on a daily basis as needed for off grid, self-consumption, peak load shaving, and other similar systems. They use the commonly preferred Lithium Iron Phosphate (LiFePO4) chemistry for stationary energy storage. It is thermally stable and has high cycle life compared to many other Li-ion technologies. The AES 42-48-6650, and AES 44-48-3000 batteries can be used with most 48 V inverters and charge controllers with closed loop communication or without as a lead battery replacement.  

 
AES batteries have a built in Battery Management System (BMS) that keeps the individual cells balanced and within the correct parameters for longest life. If operating parameters are exceeded for over 2 minutes the battery will shut down. The BMS monitors cell module voltage, battery voltage, battery current, battery temperature, and battery state of charge. It keeps a log of this data and can send out fault and warning events. There is an AEBus connection for communications between multiple batteries. Each battery has an ON/OFF switch and an internal backup fuse.

The Xanbus port on the 42-48-6650 will work directly with Schneider Xanbus network systems. It reports to the Xanbus network as a battery monitor device. There is also a comm port on all of the batteries for connection to the Discover LYNK^© monitor and communication box. Xanbus Edge Cards (daughter boards) can be added to the LYNK^© to enable communications to specific inverter brands. The 44-48-3000 can communicate to the LYNK© and with a Schneider Edge Card to the Schneider Xanbus network. A selection of cards are available to match popular inverter brands. Two Edge Cards can be used at one time for various inverters and charge controllers in one system. LYNK© enables closed loop communications providing adaptive, real­ time interaction between the Discover AES LiFePO4 battery and connected inverter system. Remote reporting of battery status is available through the inverter monitoring and web services.

• Safe and robust Li chemistry type, strong steel case
• Can be used as a lead acid battery replacement with 48 volt nominal inverters and solar chargers
•   High rate charge/discharge rated, and very high round trip efficiency
•  Complete monitoring of all battery parameters is available
•     Up to 20 AES batteries can be installed in parallel for up to 133kWh of storage
•    Convenient wall mount bracket is available for the AES 42-48-6650 and AES 44-48-3000

 The The steel enclosure is rated to IP55 (approx. NEMA 3R) but is not recommended for outdoor exposure. Terminals are post type, M8 female threads, with supplied bolts and washers. The charging temperature range is 32°F (0°C) to 113°F (45°C), with a recommended operating temperature range is 59°F (15°C) to 77°F (25°C) for maximum life and performance. The 42-48-6650 is 13.7" W x 18.5" D x 14.7" H. The 44-48-3000 is 13.3" W x 13.0" D x 10.1" H.

Listed to IEC 62133(ed.2)  UL1973 and UL2271. Ships as Hazardous materials Class 9, UN3480 (UNDOT).

Warranty is for 4 year product, 10 years with registration, or throughput rating of 38MWh (42-48-6650) or 16MWh (44-48-3000) to 60% of original capacity. Made in Taiwan.