Eagle 72M is a panel from world’s largest manufacturer Jinko Solar. It is designed for commercial and industrial projects of a small and large scope, though you can use it for building a residential system as well.
- 385W power output
- 72 monocrystalline PERC cells
- 19.42% efficiency
- Maximum Voltage: 1500VDC(UL)/1500VDC(IEC)
- 10-year product warranty, 25-year performance warranty
High efficiency with Diamond half-cut cells
Jinko Solar module provides 385 Watts of power with 19.42% conversion rate — much higher than average numbers in the industry. High production levels are achieved by using Diamond half-cut PERC solar cells. Half-cut cell design lowers the resistance of a cell and PERC technology increases the efficiency by 1% by itself.
Protected from hot spots, microcracks and PID
Potential Induced Degradation was a real bane for many solar manufacturers not that long ago. PID could lower the output of the panel by 20-25% and was especially common in wet areas. However, engineers have managed to minimize its impact on modules. Eagle 72M is a PID-free module and half-cut design of a cell minimizes the risk of hot spots development and the impact of microcracks on production.
Ready for harsh weather
The panel is well protected from all kinds of extreme weather conditions. Anodized aluminum frame and 3.2 mm tempered glass protect solar cells. The module withstands 5400 Pa snow load and 2400 Pa wind load. It is certified for salt mist and ammonia resistance.
25-year linear performance warranty
Eagle 72M comes with 10-year product warranty and 25-year linear power warranty. The panel loses no more than 3% in the first year and retains over 80.2% of its output after 25 years.
77.91 × 39.45 × 1.57 inches