MRCOOL Hyper Heat 2nd Gen 2.5 Ton 30,000 BTU Central Ducted Heat Pump - Complete System (R454B Refrigerant)

The MRCOOL Hyper Heat 2nd Gen 2.5 Ton 30,000 BTU Central Ducted Heat Pump is a complete ducted heat pump system pairing a variable-speed inverter condenser with a multi-position air handler to deliver year-round heating and cooling through your home's existing ductwork. Unlike conventional heat pumps that lose capacity as temperatures fall, this Hyper Heat system maintains 100% heating output down to -5°F and full cooling performance up to 109°F. A MRCOOL® Smart Thermostat is included, and the system qualifies for federal energy efficiency tax credits and ENERGY STAR® rebates.

Key specifications

• Cooling / heating capacity — 30,000 BTU/h cooling; 34,000 BTU/h heating
• Efficiency ratings — 16.8 SEER2, 10.0 HSPF2-4; ENERGY STAR® V6.1 and Cold Climate certified
• Operating temperature range — full heating output at -5°F; full cooling at 109°F
• Variable-speed DC inverter compressor — continuously modulates output for comfort, efficiency, and quiet operation
• Warranty and incentives — 10-year parts, labor, and compressor warranty; eligible for federal tax credits and utility rebates

Designed for year-round performance

Most central HVAC systems rely on a gas furnace backup once outdoor temperatures fall near or below freezing — a dependency this cold-climate ducted heat pump eliminates. The MRCOOL Hyper Heat 2nd Gen delivers its full 34,000 BTU/h heating output at -5°F, making all-electric comfort a realistic choice even in northern climates. At 16.8 SEER2 and 10.0 HSPF2-4, the system reduces energy consumption in both heating and cooling seasons, and its R-454B refrigerant offers a lower global warming potential than R-410A — a future-forward choice that also aligns with evolving refrigerant regulations.

Key Applications

• Cold-climate primary heating — replaces or supplements a gas furnace in regions with sustained sub-freezing winters, maintaining full output down to -5°F without auxiliary heat fallback.
• Furnace and central AC replacement — a single system handles both heating and cooling, simplifying equipment, maintenance, and utility billing.
• Homes with existing ductwork — connects directly to standard residential duct systems, making it a clean upgrade path from an aging forced-air furnace or conventional split system.
• New construction ducted installs — the multi-position air handler fits upflow, downflow, horizontal left, and horizontal right configurations, adapting to virtually any floor plan or mechanical room layout.
• High-humidity or coastal climates — Gold Fin® corrosion-resistant coil coating on the outdoor unit extends service life in salt air and humid environments.

Installation flexibility and smart design

• 4-position air handler — installs in upflow, downflow, horizontal left, or horizontal right orientation to accommodate existing or new ductwork in any home layout.
• Compact side-discharge condenser — painted galvanized steel cabinet with a side-discharge design simplifies placement along walls and tight sideyard clearances, and makes coil cleaning more accessible than traditional top-discharge units.
• Slide-out blower and self-diagnostics — the air handler's removable blower assembly and built-in self-diagnostic panel reduce service time during routine maintenance and troubleshooting.
• MRCOOL® Smart Thermostat included — Wi-Fi-enabled control out of the box; the system also pairs with any third-party thermostat if preferred.
• Optional electric heat kit — add a supplemental heat kit to the air handler for backup electric resistance heating during extreme cold events or when additional capacity is needed.

Compatible systems and wiring requirements

This system is sold as a matched pair: condenser model CENTRAL-30-HP-C-230B00-O and air handler model MVP-30-HP-MUAH-230A00-O (MRCOOL® VersaPro® Central Ducted Air Handler). The air handler accepts 115/208/230V~60Hz, 1-phase power (minimum circuit ampacity 8.0A at 208/230V; max fuse 15A). The outdoor condenser requires a dedicated 208/230V~60Hz, 1-phase circuit (minimum circuit ampacity 29.5A; max fuse 30A). Refrigerant line sets use 3/8" liquid and 3/4" gas piping. The system is compatible with MRCOOL® No Vac® Quick Connect® R-454B pre-charged line sets, which simplify installation without requiring a vacuum pump — line sets are available separately. Traditional flare nut installation is also supported; stub pipes and copper nuts are included. The 10-year warranty requires purchase from an authorized dealer and installation in compliance with all applicable federal, state, and local codes; use of an incompatible or unapproved condenser/air handler pairing will void the warranty.

Why choose the MRCOOL Hyper Heat 2nd Gen?

The MRCOOL Hyper Heat 2nd Gen 2.5 Ton stands apart from standard heat pumps because it maintains rated heating capacity in temperatures where most competing systems have already shifted to emergency heat mode. For homeowners in northern climates looking to reduce dependence on fossil fuels without sacrificing comfort, the combination of full output at -5°F, a 10.0 HSPF2-4 rating, and ENERGY STAR® Cold Climate certification makes a genuine case for this system as a primary heating solution. The included Smart Thermostat, 4-position air handler, and 10-year parts, labor, and compressor warranty deliver standout value in the central ducted heat pump category — backed by a brand with broad installer support and available rebate eligibility across most U.S. utility programs.