SEG Solar 450w Solar Panel 144 Cell Bifacial SEG-450-BMA-BG Commercial 792 panels per Container

SEG-450-BMA-BG is a model that uses a number of technologies to bring durability and performance to the next level. This panel takes full advantage of the Passivated Emitter Rear Contact (PERC) technology that allows it to capture up to 12% more energy. All thanks to a reflective layer on the back. This design maximizes the number of photons absorbed by solar cells.

The use of half-cut cell technology is an additional perk. The solar cells of SEG-450-BMA-BG are half the size of those found in standard panels. Major advantages include reduced power consumption, extended life and enhanced efficiency in low-light conditions. At 20.7% efficiency, SEG-450-BMA-BG offers surprising performance for its weight and size. And while conventional panels use only one side to absorb photons, bifacial modules employ both sides at the same time. Thanks to the technology, this model can be up to 30% more efficient. SEG Solar provides a 15-year product warranty. Stable power output is also guaranteed — performance warranty will protect you during 30 years.

• 144 half-cut PERC cells
• 450 W nameplate capacity
• 20.7% efficiency
• 1500 V DC maximum system voltage
• MC4 connectors
• 15 years of product and 30 years of performance warranty

High efficiency of 20.7%

SEG Solar SIL panels take full advantage of the company’s technologies that have won SEG Solar multiple awards. This PERC option offers higher power output per square foot of PV modules. This means quicker installation times and fewer clamps and racks. All of which reduces your overall costs, shortening the payback time.

Heat-resistant performance

The heat is less of a threat with this module: with one of the lowest temperature coefficients in the industry, SEG-450-BMA-BG loses just -0.35% of efficiency for every 1.8°F above 77°F.

High quality standards

Multiple tests are part of the SEG Solar tight production requirements, which offer the highest level of quality assurance. Because of the facilities' high degree of automation, the business is able to uphold strict standards and minimize the number of warranty claims to an absolute minimum.

Low degradation for increased lifespan

The amount of power output loss experienced by these panels during the first year of operation will not exceed 2%. The average yearly power drop from the second to the 30th year will not surpass 0.45%. After 30 years, the module will still produce more than 84.95% of its initial output.

A panel that can handle hail, wind and snow

This module is weatherproof due to the 1.18" frame manufactured from anodized aluminum alloy and a layer of safety tempered glass. The modules' front and rear sides can withstand loads of 5400 and 3600 Pa, respectively.

Size

82.44" x 40.87" x 1.18"

Weight

61.73 lb