Briggs & Stratton PowerProtect 17-26kW Battery Warmer, 240V

The Briggs & Stratton PowerProtect 17–26 kW Battery Warmer, 240 V keeps your standby generator’s battery at the ideal temperature for cranking power — even when winter plunges well below freezing. A smart, pad‑style heater slips under the battery and plugs straight into the generator’s accessory harness, giving your PowerProtect unit the cold‑weather confidence it deserves.

• 240 V internal battery‑warmer pad (silicone, oil‑ & moisture‑resistant)
• Thermostatically controlled; activates automatically at ≤ 30 °F (‑1 °C) to prevent battery freeze‑up
• Pre‑wired quick‑connect leads — no external wiring or splicing required
• Maintains full cranking amps for reliable auto‑start during outages
• Low‑wattage, energy‑efficient operation; cycles only when needed

Winter‑proof starts

Cold slows battery chemistry, sapping voltage just when your generator must fire. The heater pad senses falling air temps and applies gentle, even warmth — so the starter motor spins at full speed and your lights come back on without delay.

Factory‑matched for PowerProtect

Designed alongside the latest PowerProtect platform, the pad’s footprint mirrors the OEM battery tray and its plug mates with the generator’s 240 V accessory outlet. Installation is as simple as “place, plug, and go,” keeping technician time (and cost) to a minimum.

Smart thermostat, efficient operation

A built‑in thermostat closes only when the mercury drops to 30 °F, then opens again as temperatures rise. That means no wasted energy — and no risk of over‑heating the battery in milder weather.

Quick, no‑mess installation

Remove the battery, lay the pad on the tray, route the harness through the provided grommet, plug it in, and reinstall the battery.

Electrical Ratings

Voltage: 240 VAC • Thermostat Set Point: 30 °F (‑1 °C)