Silfab 580W Solar Panels 144 Cell Bifacial SIL-580-XM+ Assembled in the USA

SIL-580-XM is a model that uses a number of technologies to bring durability and performance to the next level. The Passivated Emitter Rear Contact (PERC) technology ensures excellent power output. This solar cell type employs an additional reflective layer to absorb more sunlight.

To further boost the performance, Silfab employs half-cut cell technology. Each of the panel’s 144 cells is only half the size of a traditional solar cell. This grants SIL-580-XM lower resistive losses and better shade tolerance. At 22.4% efficiency, SIL-580-XM offers surprising performance for its weight and size. And while conventional panels use only one side to absorb photons, bifacial modules employ both sides at the same time. Thanks to the technology, this model can be up to 30% more efficient. Silfab paid as much attention to durability as they did to performance. SIL-580-XM is guaranteed to retain at least 83.5% of output after 30 years. Product warranty for this panel lasts 12-25 years.

• 580 W power output
• 144 half-cut PERC cells
• 22.4% efficiency
• 1500 V DC maximum system voltage
• EVO2 from Staubli connectors
• 12-25-year product and 30-year performance warranties

High efficiency of 22.4 percent

Silfab N-TYPE panels fully use the firm's innovations, which Silfab has received several distinctions for. With PERC technology, more electricity can be produced per square foot of PV modules. As a result, there will be less clamps and racks required during installation. All of which lowers your overall expenses and accelerates the payback period.

Exceptional performance in scorching weather

At high working temperatures, a low temperature coefficient equals increased energy generation. Every 1.8°F over 77°F results in a model's efficiency loss of just -0.29 percent.

Quality and reliability

SIL-580-XM undergoes various quality checks during the production process and is subjected to serious quality and reliability testing. Manufacturing facilities are highly automated, removing the possibility of human errors. Silfab is committed to quality, safety, and dependability to ensure you get the finest.

Low degradation for increased lifespan

The amount of power output loss experienced by these panels during the first year of operation will not exceed 2%. The average yearly power drop from the second to the 30th year will not surpass 0.50%. After 30 years, the module will still produce more than 83.5% of its initial output.

A panel that can handle hail, wind and snow

The 1.4" frame built of anodized aluminum alloy and a layer of protective tempered glass make this module weather-resistant. The front side of the modules can withstand a 5400 Pa load, whereas the back side can withstand a 2400 Pa load.

Size

89.7" x 44.6" x 1.4"

Weight

63 lb