Cart0
Out of stock

MIDNITE Charge Controller MPPT 96А MPPT CLASSIC 150

StarStarStarStarStar
(19 ratings)

This product is out of stock

Subscribe to updates – we'll let you know when the product is back in stock. Normally, we update products every 2 weeks.

By clicking "Notify me", I agree by electronic signature to: (1) receive marketing and other texts and messages from A1 SolarStore, directly or from third parties acting on its behalf, at the email address I entered above; (2) the Terms and Conditions; and (3) the Privacy Policy.

More Midnite Solar Inc products

3 products
Limited stock
FREE SHIPPING
MidNite Solar MNLR4548RE 4.5kW Pure Sine Inverter with Charger
$1,321.90
Limited stock
FREE SHIPPING
MidNite Solar MNROSIE7048RE 7kW Pure Sine Inverter with Charger
$3,233.85 $3,718.93 Save $485.08

Customer reviews & Questions

Verified buyer reviews
Customer Reviews A1 SolarStore on trustpilot
  • Reviews (19)
  • Questions (3)
got it installed in october been using it every day since. no problems no weird noises no faults nothing. just charges up during the day and runs the house at night like its supposed to. floor mounted mine which was easy. midnite makes good products this ones no different. would recommend
fine where power is spotty and this 4.5kW unit keeps lights and fridge running. transfer is smooth and feels safe. its small enough to fit in tight spaces.
I was building my summer house from scratch and this is what I used. It might seem frightening to look at, but an all-in system like this actually saves you a lot of time. Midnite devices I know well and I trust them, Shneider inverters work without any accidents, so the product is quality.
thank you for delivery, it arrived on time
Been using these for years. One of the best units out there. Outback used to be my favorite, but not any more. If you want the best wind controller, I recommend this model.
I purchased panels, batteries, an inverter and this controller here two months ago. The staff was very helpful and professional, their calculator is very convenient for sizing the system. The shipping took a little longer than expected due to some holidays, but it’s all good. nothing was damaged, nothing was missing. Good job!
I like how the chassis of the Midnight Classic are made. It is a top-notch charge controller that will help you prolong the life of your batteries if you follow the directions. Thanks for the recommendation, guys!
Following an outage last winter I decided to build a back up power system. I bought four used solar panels and this Midnite Solar controller. Installing the Classic is very easy once all the other elements are in place. It has an RJ45 connector for remote monitoring from any device on the network.
Extremely pleased with the charger. At first I coupled it with a 12v inverter, now I am using a 48v. Works like a charm. I had been without electricity for three week due to a hurricane, but thanks to my small solar system I did well
The best of the best! Has network capabilities... This CC is a piece of technology that creates real value to your off-grid applications. Has been my choice for more than ten years.
I have a 4800w system and they handle it all splendidly, and I have one more unit for the wind system I am going to build. I hope my wind system works as well as all midnite products I have used till this moment.
My friend has solar as well, but he had no charge controller. so his battery was constantly overcharged and eventually it stopped charging at all. that’s when I saw that getting a regulator really makes sense if you want to save your battery. Plus it’s very convenient cause you see what’s going on with your system
I didn’t know that charge controllers were a thing, but read a couple articles on your website and they were quite helpful. My last two batteries did in fact die too quickly and for a good reason. Hope that now with a regulator the new one will last longer.
The regulator is fine. It’s well made, at least it doesn’t look like it’s going to break in the next second. the monitor is good, you can adjust the charging process and whatnot. It’s pretty efficient from what i’ve seen. solid product
Purchased this bad boy along with Canadian Solar panels and outback inverter. thank you for all the help and advice! The package arrived, everything works like it should.
At first I wasn't sure if I even needed a charge controller, but after a bit of research I understood its purpose. It’s not that expensive anyway and the system is much safer this way. Thanks for the service!
Outlaw1
08/12/2021
I have 2540 watts of installed capacity, will the 150 be enough?
A1 SolarStore
It will work if the voltage of your system is below 150 V. Also keep in mind that the maximum output current is limited to 96 A.
Jeddy
07/26/2021
Will it work with my 12V battery bank?
A1 SolarStore
Yes. This model works with 12, 24 and 48 V batteries.
Tag Bunny
06/15/2021
I have a 48V running setup already. What else do I need to purchase to fully install this midnite controller?
A1 SolarStore
If you already have a working set, you just need cables and breakers. Give us a call and we will help you finish your system.

Specification

Controller typeMPPT
Maximum charging current96A
Maximum voltage of the solar panels150 V
Dimensions LxWxH19 x 8.5 x 5.7 in
ManufacturerMidnite Solar Inc
Manufacturer Part #CLASSIC150
Warranty5-YEAR WARRANTY

More Solar Charge Controllers

58 products

Attachments

About product

LIQUIDATION SALE
All Liquidation Sale items are sold “as-is” with no returns, refunds, exchanges of any kind. By completing your purchase, you acknowledge and accept these terms in full.

MidNite Solar Classic 150 controller has MPPT modes for solar, wind, or hydro. Power curves are user-adjustable. Includes a learning mode for self-optimization. Accommodates solar arrays with operating voltages up to 150 VDC. Offers features including arc-fault detection (not currently listed to UL 1699B) and Ground Fault Protection (GFP) which makes a separate GFP breaker assembly unnecessary.

Features

  • HyperVOC protects the controller when open-circuit voltage exceeds the operating voltage by a margin equal to or less than the battery bank voltage.

  • Can be stacked with other Classics to act as one large controller without a separate hub.
  • Built-in Ethernet, USB and RS-232 ports which allow two-way communication.
  • 32 MB of internal memory for data storage. The user can upgrade the firmware using downloaded files.
  • Sealing kit for protection from dusty or salt-air environments. Sealing can reduce output by up to 20%.
  • MidNite 300 VDC breakers are recommended for power-source voltages over 150 VDC. Make sure that the breaker fits into your DC power center, or use a separate MidNite Big Baby Box.
  • Two auxiliary relay outputs. AUX1 can be programmed to either be a 12 VDC output (200 mA max) or as a dry-contact relay (1 A max). AUX2 can either be a 12 VDC output, a logic input or a PWM signal output for diversion load control or for connection to a MidNite Clipper.

The Classic charge controller conforms to UL 1741 and CAN/CSA C22.2 No. 107.1:2001/09/01 Ed: 3 (R2006) and is covered by a 5-year warranty. Dimensions are 14.9" x 6" x 4", and weight is 11.5 lbs for all units. Made in the U.S.A.

Tools

 

Midnite Solar, Classic 150, MPPT Charge Controller, 150VDC, 96A, 12-72V Battery, with BTS & LCD, Arc-fault Protection, CLASSIC 150

Solar Classic 150 MPPT Battery Charge Controller

Related materials