Out of stock

MIDNITE Charge Controller MPPT 96А MPPT CLASSIC 150

All Midnite Solar Inc products


Battery Charging Voltages Up to 120V battery bank
Battery compatibilityLead acid
Controller typeMPPT Charge Controllers
Maximum charging current96 A
Maximum voltage of the solar panels150 V
Dimensions LxWxH19" x 8.5" x 5.7"
Weight12 lbs
ManufacturerMidnite Solar Inc
Manufacturer Part #CLASSIC150
Delivery Time 5-7 Business Days

About product

MidNite Solar Classic 150 controller has MPPT modes for solar, wind, or hydro. Power curves are user-adjustable. Includes a learning mode for self-optimization. Accommodates solar arrays with operating voltages up to 150 VDC. Offers features including arc-fault detection (not currently listed to UL 1699B) and Ground Fault Protection (GFP) which makes a separate GFP breaker assembly unnecessary.


  • HyperVOC protects the controller when open-circuit voltage exceeds the operating voltage by a margin equal to or less than the battery bank voltage.

  • Can be stacked with other Classics to act as one large controller without a separate hub.
  • Built-in Ethernet, USB and RS-232 ports which allow two-way communication.
  • 32 MB of internal memory for data storage. The user can upgrade the firmware using downloaded files.
  • Sealing kit for protection from dusty or salt-air environments. Sealing can reduce output by up to 20%.
  • MidNite 300 VDC breakers are recommended for power-source voltages over 150 VDC. Make sure that the breaker fits into your DC power center, or use a separate MidNite Big Baby Box.
  • Two auxiliary relay outputs. AUX1 can be programmed to either be a 12 VDC output (200 mA max) or as a dry-contact relay (1 A max). AUX2 can either be a 12 VDC output, a logic input or a PWM signal output for diversion load control or for connection to a MidNite Clipper.

The Classic charge controller conforms to UL 1741 and CAN/CSA C22.2 No. 107.1:2001/09/01 Ed: 3 (R2006) and is covered by a 5-year warranty. Dimensions are 14.9" x 6" x 4", and weight is 11.5 lbs for all units. Made in the U.S.A.



Midnite Solar, Classic 150, MPPT Charge Controller, 150VDC, 96A, 12-72V Battery, with BTS & LCD, Arc-fault Protection, CLASSIC 150

Solar Classic 150 MPPT Battery Charge Controller

Reviews & Questions

  • Reviews (3)
  • Questions (3)
I like how the chassis of the Midnight Classic are made. It is a top-notch charge controller that will help you prolong the life of your batteries if you follow the directions. Thanks for the recommendation, guys!
Sean E. Kelleher
08/15/2021 12:24 pm
Extremely pleased with the charger. At first I coupled it with a 12v inverter, now I am using a 48v. Works like a charm. I had been without electricity for three week due to a hurricane, but thanks to my small solar system I did well
R. Leon
07/11/2021 02:33 pm
I have a 4800w system and they handle it all splendidly, and I have one more unit for the wind system I am going to build. I hope my wind system works as well as all midnite products I have used till this moment.
06/19/2021 02:13 am

Leave a review

I have 2540 watts of installed capacity, will the 150 be enough?
08/12/2021, 09:11
It will work if the voltage of your system is below 150 V. Also keep in mind that the maximum output current is limited to 96 A.
Will it work with my 12V battery bank?
07/26/2021, 12:16
Yes. This model works with 12, 24 and 48 V batteries.
I have a 48V running setup already. What else do I need to purchase to fully install this midnite controller?
Tag Bunny
06/15/2021, 12:15
If you already have a working set, you just need cables and breakers. Give us a call and we will help you finish your system.